Massey Ferguson 168

Here are the specifications for the Massey Ferguson 168 (from about 1972-1976). If yours is exactly 1977, some specifications may overlap or vary slightly depending on trim, options, or regional configuration.

🚜 Massey Ferguson 168 – Key Specifications

Feature	Specification
Production years	~1972 to 1976 (though some units still appear in use later)
Engine model	Perkins A4.236, 4-cylinder, liquid-cooled diesel
Displacement	~236 cubic inches (~3.9 L)
Power output	~ 69 HP (~ 51.5 kW) at rated RPM (~2000 rpm)
Torque	~ 200 lb-ft (~271.2 Nm) @ ~1250 rpm
Compression ratio	~ 16:1

🔧 Transmission / Drivetrain / PTO

Feature	Specification
Transmission options	8-speed (8 forward / 2 reverse) mechanical or 12-speed (12 forward / 4 reverse) Multi-Power version
PTO type / speed	Live / independent PTO depending on transmission. PTO speed 540 rpm.

📏 Dimensions, Weight & Capacities

Feature	Specification
Wheelbase	~ 87.5 in (≈ 222 cm)
Length	~ 138 in (≈ 350 cm)
Width	~ 72 in (≈ 182 cm)
Height	~ 66.3 in (≈ 168 cm)
Ground clearance	~ 13 in (≈ 33 cm)
Operating weight	~ 4,866 lb (≈ 2,207 kg)
Fuel tank capacity	~ 21 gal (≈ 79.5 L)
Hydraulic system capacity	~ 7.8 gal (≈ 29.5 L)

⚙️ Other Features

Available in 2WD (4×2) and MFWD/4WD configurations, depending on model and options.
Braking: wet disc brakes
Hitch / lift capacity (rear 3-point hitch): ~ 4,000 lbs (≈ 1,814 kg)
Tyres: typical front ~ 7.5×16; rear ~ 13.6/12×36

If you want, I can try to find the exact specifications for a 1977 MF-168 (if it was made then), since there might be small changes. Would you prefer that?